Junior Cycle · Junior Cycle Wood Technology
Junior Cycle Wood Technology: Nails, screws & fittings
How often Nails, screws & fittings comes up on the Wood Technology papers, every year it was asked, and questions to try.
CL Asked on 3 of the last 5 Common Level papers, most recently in 2026. most years
Quick ones on Nails, screws & fittings.
- Are always quicker to put in than nails
- Can be removed and refitted without damage
- Never need a pilot hole or a clearance hole
- Starting small panel pins
- Setting nails below the surface
- Pulling out nails
- Quicker to put in
- Stronger at pulling parts together
- Easier to remove neatly
Show the answers
(a) Can be removed and refitted without damage
(b) Pulling out nails
(c) Quicker to put in
Common Level
Asked on 3 of the last 5 Common Level papers, most recently in 2026. most years
Every paper, year by year
| Year | Where it came up |
|---|---|
| 2026 | Q2a, Q2b |
| 2025 | Q2g |
| 2024 | Not asked |
| 2023 | Not asked |
| 2022 | Q1d |
Links open the State Examinations Commission’s paper for that year.
More Nails, screws & fittings questions
Nails, screws & fittings, 2 marks
Knock-down (KD) fittings are used in flat-pack furniture mainly because they…
- Make the furniture heavier and stronger
- Replace the need for any wooden parts
- Let it be taken apart and put back together
Show the answer
Let it be taken apart and put back together
KD fittings such as cam locks, block joints and cross dowels join panels without glue. Furniture can be flat-packed, carried easily and put together with simple tools.
Other Wood Technology topics
- Common tree species & uses
- Design sketching & rendering
- Hardwoods & softwoods
- Marking out & templates
- Power tools & machines
- Seasoning & wood defects
- Wood finishes & preparation
- Woodwork joints
- Working drawings
- Workshop health & safety
- Chisels, planes & sharpening
- Cutting lists & costing
- Forestry & sustainability
- Tree structure & growth
- Adhesives & clamping
- Hand saws
- Photosynthesis & life cycle
- Shaping & edge mouldings
- Veneers, marquetry & laminating
- Carving & intarsia
- Manufactured boards
- Woodturning
- Design principles & ergonomics
- Design process & research
- Plastics & alternative materials
- Sustainable design & waste
- Timber conversion